News News

NEWS

We will share the latest company information and industry trends with you.

/
/
/
How to maintain and maintain composite wood clarinet

News Categories

新闻分类

Contact Details

How to maintain and maintain composite wood clarinet

(Summary description)The composite wood clarinet has no special requirements for the placement method, mainly do not place the tube in a place that is easy to fall. In addition, it is recommended to put it in a storage box for temporary storage, not standing it up.

How to maintain and maintain composite wood clarinet

(Summary description)The composite wood clarinet has no special requirements for the placement method, mainly do not place the tube in a place that is easy to fall. In addition, it is recommended to put it in a storage box for temporary storage, not standing it up.

Information

The composite wood clarinet has no special requirements for the placement method, mainly do not place the tube in a place that is easy to fall. In addition, it is recommended to put it in a storage box for temporary storage, not standing it up.

good price and quality composite wood clarinet products
1. Storage environment
The manufacturer of composite wood clarinet tells you that for clarinets with natural wood tubes, the material itself is very sensitive to rapid temperature and humidity changes. Therefore, you must pay special attention when storing, otherwise it is easy to cause damage to the tube body. Be careful not to store the clarinet in a place where temperature and humidity change drastically.
The composite wood clarinet manufacturer tells you that you do not need to be excessively moisture-proof in the south, just pay attention to the external environment, and do not expose it to the sun in summer.
In the north, especially in winter, don't put it around the heater, and you must pay attention to the preservation of humidity. You can put humidifying items in the storage box appropriately. The manufacturer of composite wood clarinet tells you not to use the instrument in windy days in winter, it is best not to take it outdoors, and in summer, be careful not to expose it to the sun.
The composite wood clarinet manufacturer tells you that for the clarinet of the rubber tube, the above problems also need to be paid attention to, but it is relatively easier.
2. Daily use
The manufacturer of composite wood clarinet tells you that for wooden clarinets, new instruments must be fully oiled on the inner and outer pipes-both white oil and sewing machine oil can be used. Don't blow for a long time for the first time. At this time, the wood hasn't adapted to it. You can gradually extend it from five minutes. Before installing the new tube, you can apply cork paste to the joints of each section of cork to lubricate. Be careful not to apply force to the keys.
Before playing
The manufacturer of composite wood clarinet tells you to check whether the keys are flexible, whether the screws are loose, whether the leather cushion is leaking, etc. If there is a problem that you cannot handle by yourself, do not disassemble the clarinet at will, and send it in for repair in time.
After the performance
The manufacturer of composite wood clarinet tells you to remove the reed and wipe the moisture dry after playing. After the mouthpiece is used up, clean it, and then insert a cleaning cloth through the joint to remove water. After each performance, use a special tube cloth to gently wipe the tube body and key surface.
Pay attention to removing the water in the pipe wall, shake the bell mouth downwards, and then use a medium-sized cleaning strip through the pipe body to completely remove the water inside. Moisture is likely to remain in the joints, so you can use clean gauze or cotton swabs to carefully remove the moisture. You can also clip absorbent paper between the leather pad and the sound hole to clean the water in the gap between the leather pad, and be careful not to damage the leather pad. When the inside of the instrument is basically dry, put it in the storage box.
Do not put the used wet pipe cloth with the instrument in the instrument case. Wet piping cloth may cause the spring to corrode, or the key surface may be stained. When the pipe cloth is worn, it should be replaced with a new cloth in time. The fluff on the pipe cloth worn out due to cleaning may accumulate in the pipe, so it is not suitable to continue to use it.
Regularly maintain the metal parts of the clarinet, about once a month, drip a little lubricating oil on the button screws without loosening the screws for lubrication. The manufacturer of composite wood clarinet tells you not to drip too much, just one or two drops, and then move the buttons up and down several times. Wipe off the lubricating oil on the pipe body. Regularly use the sound hole cleaning stick to remove the dirt on the sound hole of the button.
The composite wood clarinet manufacturer tells you that you can send it to a special musical instrument store once a year for comprehensive maintenance and cleaning, including testing the leather pads for air leakage, maintaining and replacing screws, corks, keys, etc.

Keyword:

Scan the QR code to read on your phone

Relevant Information
Share the latest developments of the company and industry exhibition information with you.
Related Products
We mainly produce flutes, clarinets, piccolos, horns, trombones, saxophones and relevant accessories.
PRODUCTS
language
中国
韩国
韩国
韩国
韩国
韩国
© Longkou Jinming Musical Instrument Co., Ltd.
鲁ICP备09083916号-1
Powered by:www.300.cn

Jinming Musical Instrument