News News

NEWS

We will share the latest company information and industry trends with you.

/
/
/
Choice and installation of gold brass Sax

News Categories

新闻分类

Contact Details

Choice and installation of gold brass Sax

(Summary description)The superior and inferior quality of gold brass Sax is related to the low playing level of beginners, so it should be purchased with caution.

Choice and installation of gold brass Sax

(Summary description)The superior and inferior quality of gold brass Sax is related to the low playing level of beginners, so it should be purchased with caution.

Information

1. Selection:

The superior and inferior quality of gold brass Sax is related to the low playing level of beginners, so it should be purchased with caution.Although better, gold brass Sax, an imported brand, is undoubtedly unacceptable in terms of Chinese popular purchasing power.Although the homemade Gold Brass Sax is less expensive, some gold brass Sax are of suboptimal quality, and for some, purchasers should request specialist assistance in their identification.If buying it yourself, attention should be paid to the following:

good price and quality Gold brass sax

(1) Observe carefully the exterior of gold brass Sax, whether the paint is uniform, with or without irregularities.

(2) Check that the bond pad of the gold brass Sax has an impression, that the buckle on the resonance accurately contacts the center of the aperture, and that the bond pad covers rigor.

(3) The mechanical sections of the gold brass Sax were examined for sensitivity, suitability of spring tension, and gap between bond post and link.

(4) The gold brass Sax was checked for pitch and the difference between the two tones should not exceed ten.

2. Installation:

(1) Take gold brass Sax's sentinel piece out of the sentinel clip or sentinel box, and press the sentinel piece by the left thumb as it coincides with the plane of the piccolo head.

(2) With the right hand, the sentinel cuff of gold brass Sax was draped over the piccolo, along the line to be crossed over the pico head indicator, and the suture of the sentinel cuff was then aligned at the median of the sentinel.

(3) After the gold brass Sax was fitted, the piccolo was inserted into the dome, and the piccolo head vent center was directed against the overtone bond on the dome.

(4) Insert the fitted dome into the supervisor and tighten the screw on the upper end of the supervisor.

(5) Band pre ensembles, generally corrected with standard tone a, when corrected for middle saxol F, second tone B.If the gold brass Sax tone is low, there is little spacing on the cork of the piccolo head to the dome;If gold brass Sax tone is high, the piccolo head is pulled out of the cork of the dome until the pitch is well aligned.

 

Keyword:

Scan the QR code to read on your phone

Relevant Information
Share the latest developments of the company and industry exhibition information with you.
Related Products
We mainly produce flutes, clarinets, piccolos, horns, trombones, saxophones and relevant accessories.
PRODUCTS
language
中国
韩国
韩国
韩国
韩国
韩国
© Longkou Jinming Musical Instrument Co., Ltd.
鲁ICP备09083916号-1
Powered by:www.300.cn

Jinming Musical Instrument